Quality Material

• All #1 Yellow Pine Lumber used throughout building. Stronger, holds fasteners better.
• Corner Braces #1 Yellow Pine standard at each corner.
• 2×4 Wall Girts #1 Yellow Pine 24″” Spacing.
• 2×6 Treated Center Match #1 Yellow Pine 2 Rows Standard on Buildings.
• Buildings on a concrete foundation have 1 Row of 2×6 Treated Center Match. Bird tight seal at end of building.

• 2×4 Strip Sheathing #1 Yellow Pine on top of trusses 24″” Spacing.
• Lapped one foot at splices.
• 2×6 Eave Boards #1 Yellow Pine.
• 6×6 Posts are notched for direct support of Truss.
• Truss is nailed and Bolted.
• Double 2×4 Knee Brace #1 Yellow Pine are used for additional strength.

• 16″” Diameter
• Holes 4’ Deep from Level Grade
• 1/2″ x 10″ Anchor Rod
• 80#’s of 5,000# Concrete Mix for Pad
• 80#’s of 5,000# Concrete Mix for Anchor
• Total of 160#’s Used
• 5000 PSI High Early Strength Concrete Mix
• Buildings wider than 60’ have an additional 80#’s added.

• Concrete Foundation with 4X6 Treated Plate and U-Post Brackets.
• Buildings on a concrete foundation have 1 Row of 2×6 Treated Center Match. Bird tight seal at end of building.

6X6 Post versus 2X6 Columns

• 6X6 Post’s are Kiln Dried before Treating, this allows Treatment to follow the Grain of Wood from Ends of Post for 100% Penetration of Sapwood.
• Minimum of .60 CCA Pressure Treatment
• 50 Year Warranty
• No Splices. 6×6’s have 5 1/2 more square inches of wood than 3-2×6’s, that is 22% more.

Plasti-Sleeve Offers Distinct Advantages

• Whatever the preservative formula give your building’s wood foundation the ultimate in protection – Plasti-Sleeve.
• A unique modern feature that gives you a quality edge over the “basic building” package.
• An easy to use product that won’t interfere with the grade plank, or other framing members.
• Made from a high quality HDPE plastic which has an in-ground decay resistance of hundred’s of years! Can help dismiss many customers concerns regarding post rot, decay, or insect attack.
• Can help eliminate post uplift in heavy soils and or freeze/thaw conditions.
• Versatility in uses: Side and end wall posts in Post Frame, porch posts, stub posts for sliding doors, deck and floor supports, mailbox posts, and many other applications.
• Lifetime Limited Warranty on Plasti-Sleeve
• Protect the investment in your new building with Plasti-Sleeve.
• For 6×6 (S4S) solid post Length 5′ 6″

• Lumbermate Truss Engineering
• D.S.S. and M.S.R. Lumber
• Straight Bottom Chord is Standard, allows full clearance throughout building.
• Minimum 32# per sq ft Roof Load 8′ oc
• Standard Truss Spacing 8’ oc
• Life of Structure Snow Load Warranty
• End wall posts go to top of end wall for additional strength.

Colors shown on this website are for illustration purposes and may vary from actual color and finish.

• American Made Steel
• Heavy 29 Gauge
• 36″ panel coverage
• Ribs on 9″ center, 3/4″ Rib Height
• Engineered with a Siphon Groove to minimize leaks.
• Wide fastening surface for easy application.
• Unique lap groove hides the overlap giving a smooth, clean appearance.
• Galvalume® AZ50
• 80,000 PSI min
• Substrate Thickness 1.60 mil
• SMP Paint System
• WARRANTY: Lifetime limited paint adhesion, 30-yr. chalk and fade, 20-yr. Galvalume perforation.
• Manufacture’s Website
• Color Chart  (color may vary from actual color) 29 Gauge Siding and Roofing Panels.
• This extraordinary paint system is available in a wide range of color choices.

• Powder Coating the new standard in painted finishes absolutely the finest, most durable, protective coating in the fastener industry a technological advance that has changed the industry:
• Outlasts any conventional spray painted finish.
• Powder painted finish lasts the life of your panels. 40 Year Warranty
• Powder coating process paints under the fastener head where corrosion can start.
• Powder Coated Tough Coating over superior JS500 substrate exceeds 3000 Hours Salt Spray Life and Leland exceeds 50 cycles in the SO² Kesternich Test with NO RED RUST !
• NO CHIPPING, ABRASION RESISTANT, NO PREMATURE FADING !

Screws attached in flat (vs. ribbed) areas of steel panels:

• Installing in the rib allows movement around the critical seal area and that movement then compounds the potential for leaks.
• Installing in the flat area is a tighter, more secure method; there is no gap between steel and wood.
• A firm, lasting grip maximizes seal effectiveness and strength. Structural integrity and leak resistance are not compromised.

• Expansion, contraction and wind are constantly stressing the fasteners, “trying” to work them free. The tight grip of a screw through the flat doesn’t give these forces any leverage, thus preventing roof leaks and the reduction of building strength.
• When a screw is attached to the flat (instead of ribbed) area of a steel panel, a tighter connection is assured.
• Since a post-frame building gets much of its strength from the steel panels, the tighter it is attached to the building, the better. Putting screws in the flat of the steel panel provides the tightest and best possible connection.

• DRIPSTOP holds that moisture until conditions go back above the dew point and it is released back into the air in the form of normal humidity.
• It acts much like a sponge that soaks up the moisture when it appears and releases it as it returns to its humid air state.

• DRIPSTOP is the world leader in this type of condensation control. It has been on every continent in every climate condition across the globe.
• Applied directly to the panel at the factory.
• Smoke Generation and Flame Spread—UL 723 Approved.
• Noise Reduction—up to 20% of rain noise.
• DRIPSTOP provides a medium for trapping condensation in the specially designed pockets in the membrane.

• Insulation and Condensation Control.
• THERMAX White Insulation is a glass fiber reinforced polyisocyanurate foam core product faced with a nominal 1.25 mil embossed white acrylic coated aluminum on one side and a nominal 0.9 mil smooth aluminum on the other side.
• Features: High R-Values, Durable Finish for Harsh Environments, White Acrylic Spray Washable Surface, Class A Fire-Rating.

• The white surface reflects and helps to reduce energy cost and improves the work and growing environment. Prevents moisture condensation within and behind the insulation and minimizes structural wood decay, metal corrosion and condensation inside the structure. Stabilized R-Value = 3.3 to 4.0
• THERMAX insulation will not sustain fire without a separate flame source. In fact, using Thermax White could help you qualify for the lowest possible insurance rates.
• THERMAX White Finish insulation is backed with a 15-year limited thermal performance warranty.
• Download Literature
• Manufacture’s Website

• Buildings Standard with R.C. Rake and Gutter. More attractive than plain trim used by others. 
• Gives the appearance of a 6”” overhang.
• Standard Commercial Gutter goes on before roof steel. Designed to eliminate the worry of snow and ice slide.
• Larger to carry more water.
• Downspout Same Color as Siding.
• Trim Package available in all colors. Lengths up to 20’’ long eliminating splices.

• Specially Designed Trim Package
• Bird Tight Seal at End of Building

Specially designed trim package gives downspout same look as siding.

2-Piece Sliding Door Center

• Center Door Guide on a 6×6 post buried in the center of the door opening with concrete.
• All components are made of heavy steel.
• 2-piece Door Centers are 2-ply 2×4’s for added Strength.

Sliding Door Hardware

• Sliding Door Stay: Prevents door from closing on its own while open.
• Sliding Door Jamblatch: 7-inch hook and powerful cam-action pulls the door securely against the jamb. Eliminates rattling and wind damage. Opens inside only.
• Sliding Door Track Easy rolling track guaranteed for life of building.

Sliding Door Bottom Guide

• Door rolls easy.. No binding or catching on the smooth, mated surfaces.
• 2 Rows of Treated #1 Yellow Pine 2×6 Center Match Standard on Buildings.

• Engineered Steel I-Beams used for Side Door Headers.
• Full clearance side door same height as end door.

20 Series Insulated Commercial Walk Door

Commercial Thermal Break Window (CTB500) 

CTBE500 Series Commercial Windows

All Aluminum Trimline Windows (AATL) 

Liner Panel Ceiling and Sides

Blown In R-30 Insulated Ceiling

6” R-19 Fiberglass Insulated Sides

• Cupolas are available in 24 x 24, 36 x 36, and 48 x 48 inches with louvered sides.
• All cupolas are pre-painted 29ga steel construction.
• Pre-painted steel construction.  Colors and color combinations that match roll-formed steel colors.
• Optional weather vane.  The complete unit has an arrow and ornament at the top with N-S and E-W directionals. They are made of aluminum and are available in 24″, 30″ and 40″. Variety of styles to select from.

• All metal joints feature “Tog-a-Loc” construction for non-rusting permanent construction.
• Roof and sides interlock for weather tight connection.
• Optional premium flashing kit is available. It raises the cupola 3 1/2″ higher above the peak of the roof, plus it gives the sides a fuller look from the ground.
• Optional Lited Sides. Full perimeter reinforced hemmed angles for rigid window frame opening.  Galvanized steel internal gussets for diagonal strength.  Plyco manufactured acrylic glazed white aluminum windows installed in each side with permanent silk-screened gridwork.
• Download Literature
• Manufacture’s Website

• Brings Natural Light into Buildings
• Retains Optical Clarity . . . Will Not Yellow Like Fiberglass
• Up to 20 Times Stronger than Fiberglass
• 100% UV Protection
• Withstands Extreme Temperatures (-40oF to +270oF)
• Hail and Wind Resistant
• Matches the Most Popular Metal Roofing . . . 9” & 12” Profiles
• Best Snow Load Capacity
• Saves Electricity

Corner Angles for an Overhead Door

Porch
Decorative Post Wrap

Recessed Porch with Mansard

Mansard

Wrap Around Porch
Decorative Post Wrap
Decorative V’s